Fault code

INVT GD20 OL1 Motor overload

Possible causes

  • The voltage of the power supply is too low.
  • The motor setting rated current is incorrect.
  • The motor stall or load transients is too strong.

Recommended checks and actions

  • Check the power of the supply line
  • Reset the rated current of the motor
  • Check the load and adjust the torque lift

Technical source

INVT GD20 Manual EN - P07.27 Current fault type — page 62

INVT GD20 Manual EN - Fault tracking — page 93

Manual tiếng Việt INVT GD20 - Xử lý lỗi — page 83