Fault code

INVT GD20 EEP EEPROM operation fault

Diagnostic context

What EEP means on INVT GD20

EEP is the GD20 eeprom operation fault. The manufacturer lists error of controlling the write and read of the parameters. as one of the documented causes.

Operating context: Start with the manufacturer troubleshooting sequence. Press STOP/RST to reset. Change the main control panel.

This diagnostic context is an editorial explanation. The possible causes and recommended checks below are the verified manufacturer troubleshooting content.

Possible causes

  • Error of controlling the write and read of the parameters
  • Damage to EEPROM

Recommended checks and actions

  • Press STOP/RST to reset
  • Change the main control panel

Technical source

INVT GD20 Manual EN - P07.27 Current fault type — page 62

INVT GD20 Manual EN - Fault tracking — page 95

Manual tiếng Việt INVT GD20 - Xử lý lỗi — page 84