Fault code

Inovance MD280 Err10 AC drive overload

Diagnostic context

What Err10 means on Inovance MD280

Err10 is the MD280 ac drive overload. The manufacturer lists the load is too heavy or locked-rotor occurs on the motor. as one of the documented causes.

Operating context: Start with the manufacturer troubleshooting sequence. Reduce the load and check the motor and mechanical conditions. Select an AC drive of higher power class.

This diagnostic context is an editorial explanation. The possible causes and recommended checks below are the verified manufacturer troubleshooting content.

Possible causes

  • The load is too heavy or locked-rotor occurs on the motor.
  • The AC drive model is of too small power class.

Recommended checks and actions

  • Reduce the load and check the motor and mechanical conditions.
  • Select an AC drive of higher power class.

Technical source

Inovance MD280 User Manual EN - Err10 troubleshooting — page 160

Inovance MD280 troubleshooting VI - Err10 — page 10